Clearance

Filter
422 products

422 products

Sold Out
Black steel 13-tooth front sprocket for the Talaria Sting MX5, shown face-on with its splined bore and 428-13T stamp
Talaria Sting MX5 Driving Sprocket 428-13T
15.60 EUR
Talaria Komodo rear fender reinforcing holder, a textured black bracket with a triangular cut-out and three bolt holes
The fender holder from the opposite side, its pressed centre rib running down the arm to the single-hole tab
Talaria Komodo Rear Fender Reinforcing Holder
14.99 EUR
Talaria Komodo motor protection board in textured black, angled view showing the slotted vents across its outer face
Underside of the Komodo motor protection board, glossy ribbed inner face with mounting eyelets at each corner
Talaria Komodo Motor protection board
25.00 EUR
Talaria-branded 60V 12A charger with a cooling fan in the case, coiled leads, blue output plug and EU mains plug
Talaria XXX 2025 Battery Charger (EU 230V) 60V 12A
250.00 EUR
Black Talaria Komodo side stand at full length, pivot lugs at one end and the flat foot at the other
Reverse of the Komodo side stand, showing the ribbed centre channel and the spring mounting boss
Talaria Komodo Side Stand
38.00 EUR
Talaria Komodo fork protectors shown as a left and right pair with the small mounting clip beside them
Inner faces of the Talaria Komodo fork guards, showing the upper mounting bosses and the separate clip
Talaria Komodo Replacement Right Side Fork Protector
17.50 EUR
Black CNC left footpeg for the Talaria Sting, stainless grip pins ringing the platform and a threaded pivot stud
Talaria left footrest from the heel end, threaded stud and folding pivot clamp ahead of the toothed platform
Talaria Sting MX3 / MX4 / MX5 / XXX Left Footrest Assembly CNC – Black
47.00 EUR
Oval off-road headlight for the Talaria Sting R and MX4, clear lens in a finned black housing with its plug alongside
Talaria Sting R / MX4 Off-Road Headlight
53.30 EUR
Black faceted battery pack holder cover for Talaria Sting MX3 and MX4, outer face angled up with two threaded bolt holes
Underside of the Talaria Sting MX3/MX4 battery cover, showing the hollow moulding, internal ribs and two-hole bolt plate
Talaria Sting MX3 / MX4 Battery Pack Holder Cover
18.99 EUR
Pair of matt black Talaria Komodo fork protectors laid side by side with a small mounting bracket
Both fork guards from the front, one with the Talaria arrow logo and lower clamp fitted, bracket alongside
Talaria Komodo Replacement Left Side Fork Protector
17.50 EUR
Talaria Sting R off-road tail light angled on white, red faceted lens under a clear cover with its wiring loom coiled above
Talaria Sting R tail light seen from behind at an angle, its two threaded mounting studs and slotted back plate facing up
Talaria Sting R Tail Light Offroad
40.00 EUR
Sold Out
Black Talaria X3 rear mudguard at an angle, with its plate-mount bracket, rubber grommets and slotted tabs
Smooth outer face of the Talaria X3 road-legal rear mudguard, tapering to a pointed mud flap
Talaria X3 Road Legal Wheel Rear Mudguard
19.50 EUR
Zinc-plated M6x1 battery cover pin for Talaria Sting MX3 and MX4, hex socket head with a threaded mid-section
Talaria Sting MX3 / MX4 Battery Pack Holder Cover Pin (M6x1)
6.50 EUR
Fastace fork guard Talaria MX3/MX4/LB - Left
Fastace fork guard Talaria MX3/MX4/LB - Left
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Left
19.99 EUR
Sold Out
Matte black Talaria Komodo handlebar shown full length, with its low rise and gentle sweep
Laser-etched markings on the handlebar centre reading 28.5 mm diameter and a 2025/08 date code
Talaria Komodo Handlebar
54.99 EUR
Black curved side kickstand leg for Talaria Sting MX3 and MX4, clevis pivot at the top and a flattened foot pad
Talaria Sting MX3 / MX4 Side Kickstand
30.00 EUR
80/100-21 front inner tube for the Talaria Komodo, folded flat with its metal valve stem facing outward
Close-up of the front tube's rubber folds, showing the moulded seam ribbing and a faint blue guide stripe
Talaria Komodo Original Front Tire Tube 80/100-21
31.00 EUR
-30%
Talaria X3 / MX4 Front Axle Bolt (OEM)
14.80 EUR 10.31 EUR
Black steel headlight holder for the Talaria Sting, arched cut-out and four slotted mounting arms
Talaria headlight bracket from the other side, folded upright leg with two slotted bolt holes
Talaria Sting MX3 / MX4 / MX5 Headlight Holder
12.49 EUR
-1%
Zinc-plated coil side stand spring with an open hook at each end, for Talaria Sting MX4, Sting R and X3
Talaria Sting MX4 / Sting R / X3 Side Stand Springs
6.50 EUR 6.44 EUR
Pair of glossy black Fastace fork guards for the Talaria Sting MX3, MX4 and LB, angled to show their lower mounting feet
Close-up of the fork guard's lower foot, two steel-lined bolt eyelets beside the moulded Fastace logo
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Right
19.99 EUR
-1%
Black aluminium Talaria Komodo right foot peg from above, ringed with pointed stainless traction studs
Underside of the Talaria Komodo right foot peg, showing the forked mounting clevis stamped R
Talaria Komodo Right Aluminium Foot Peg – Black
33.99 EUR 33.52 EUR
Long matte black under-seat fender for the Talaria XXX, angled to show its raised fixing bosses and lipped end
Other side of the Talaria XXX under-seat cover, with notched cut-outs at the wide end and a moulded stamp patch
Talaria XXX Under-Seat Plastic Fender
27.99 EUR
Black CNC right footpeg for the Talaria Sting, grip pins across the platform and threaded stud at the pivot
Right footrest tipped to show the mount block face, its bolt holes and the threaded stud
Talaria Sting MX3 / MX4 / MX5 / XXX Right Footrest Assembly CNC – Black
47.00 EUR
-2%
Short zinc-plated Talaria kickstand pivot pin, threaded at one end with a hex collar and a stepped, grooved shank
Talaria Kickstand Spring Holding Pin B Short version
8.50 EUR 8.37 EUR
Zinc-plated steel chain adjuster block for the Surron Hyper Bee, angled to show the stepped axle slot and central bolt hole
Face-on view of the Surron Hyper Bee chain adjuster plate, flat and unmarked with its notched top tab and round axle bore
Surron Hyper Bee Chain Adjustment kit left and right
30.00 EUR
Black rear mud guard for the Surron Hyper Bee laid outer face up, with two bolts and a small clamp bracket beside it
Underside of the Surron Hyper Bee rear mud guard, showing the ribbed clamp end, with the two bolts and bracket alongside
Surron Hyper Bee Rear Mud Guard
25.00 EUR
Surron Hyper Bee headlight at an angle, its oval lens on a winged black bracket with the plug lead and two fixing screws
Overhead view of the Surron Hyper Bee headlight lying lens-up, wiring tail and white connector above, mounting screws below
Surron Hyper Bee Headlight
18.00 EUR