E-Moto OEM Parts

E-Moto OEM Parts

Filter
Long matte black under-seat fender for the Talaria XXX, angled to show its raised fixing bosses and lipped end
Other side of the Talaria XXX under-seat cover, with notched cut-outs at the wide end and a moulded stamp patch
Talaria XXX Under-Seat Plastic Fender
27.99 EUR
Black faceted battery pack holder cover for Talaria Sting MX3 and MX4, outer face angled up with two threaded bolt holes
Underside of the Talaria Sting MX3/MX4 battery cover, showing the hollow moulding, internal ribs and two-hole bolt plate
Talaria Sting MX3 / MX4 Battery Pack Holder Cover
18.99 EUR
Talaria Komodo rear fender reinforcing holder, a textured black bracket with a triangular cut-out and three bolt holes
The fender holder from the opposite side, its pressed centre rib running down the arm to the single-hole tab
Talaria Komodo Rear Fender Reinforcing Holder
14.99 EUR
-2%
Short zinc-plated Talaria kickstand pivot pin, threaded at one end with a hex collar and a stepped, grooved shank
Talaria Kickstand Spring Holding Pin B Short version
8.50 EUR 8.37 EUR
80/100-21 front inner tube for the Talaria Komodo, folded flat with its metal valve stem facing outward
Close-up of the front tube's rubber folds, showing the moulded seam ribbing and a faint blue guide stripe
Talaria Komodo Original Front Tire Tube 80/100-21
31.00 EUR
Black aluminium left foot peg for the Talaria Komodo, seen from above with steel traction screws ringing the open platform
Underside of the left Komodo foot peg, showing the hollow cast body and the notched seats for the grip screws
Talaria Komodo Left Aluminium Foot Peg – Black
33.99 EUR
Zinc-plated M6x1 battery cover pin for Talaria Sting MX3 and MX4, hex socket head with a threaded mid-section
Talaria Sting MX3 / MX4 Battery Pack Holder Cover Pin (M6x1)
6.50 EUR
Black steel headlight holder for the Talaria Sting, arched cut-out and four slotted mounting arms
Talaria headlight bracket from the other side, folded upright leg with two slotted bolt holes
Talaria Sting MX3 / MX4 / MX5 Headlight Holder
12.49 EUR
Black curved side kickstand leg for Talaria Sting MX3 and MX4, clevis pivot at the top and a flattened foot pad
Talaria Sting MX3 / MX4 Side Kickstand
30.00 EUR
Pair of glossy black Fastace fork guards for the Talaria Sting MX3, MX4 and LB, angled to show their lower mounting feet
Close-up of the fork guard's lower foot, two steel-lined bolt eyelets beside the moulded Fastace logo
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Right
19.99 EUR
Surron Hyper Bee headlight at an angle, its oval lens on a winged black bracket with the plug lead and two fixing screws
Overhead view of the Surron Hyper Bee headlight lying lens-up, wiring tail and white connector above, mounting screws below
Surron Hyper Bee Headlight
18.00 EUR
Black rear mud guard for the Surron Hyper Bee laid outer face up, with two bolts and a small clamp bracket beside it
Underside of the Surron Hyper Bee rear mud guard, showing the ribbed clamp end, with the two bolts and bracket alongside
Surron Hyper Bee Rear Mud Guard
25.00 EUR
Zinc-plated steel chain adjuster block for the Surron Hyper Bee, angled to show the stepped axle slot and central bolt hole
Face-on view of the Surron Hyper Bee chain adjuster plate, flat and unmarked with its notched top tab and round axle bore
Surron Hyper Bee Chain Adjustment kit left and right
30.00 EUR
Slim black chain guard for the Surron Hyper Bee shown side-on, two bolt holes along it and one end still in its factory wrap
Surron Hyper Bee Chain Guard
16.00 EUR
Yellow front fender for the Surron Hyper Bee viewed from above, with the bagged mounting bolts and washers laid out next to it
Surron Hyper Bee Front Fender Yellow
30.00 EUR
White front fender for the Surron Hyper Bee photographed on its own from the side, showing the ribbed spine and twin mount posts
Surron Hyper Bee Front Fender White
30.00 EUR
Gloss black headlight shroud for the Surron Hyper Bee shown from behind, pointed winglets and bolt holes facing the camera
Surron Hyper Bee Head Light Shroud
25.00 EUR
Dark moulded skid plate for the Surron Hyper Bee, angled to show its three vent slots and the bolt holes with metal collars
Surron Hyper Bee Skid Plate
25.00 EUR
Black moulded Surron Hyper Bee fork protection plate stood upright, showing the curved shield and two bolt holes at the base
Surron Hyper Bee OEM Left or Right Fork Protection Plate Assy
15.00 EUR
Wavy-edged stainless rear brake disc for the Surron Hyper Bee, laid flat with its black mounting bolts piled at the hub
Surron Hyper Bee Rear Brake Disc with Bolts
30.00 EUR
Wavy-edged stainless front brake disc for the Surron Hyper Bee, laid flat with its six mounting bolts stacked in the centre
Surron Hyper Bee Front Brake Disc with Bolts
30.00 EUR
Steel front sprocket for the Surron Hyper Bee motor gearbox, shown face-on with its splined centre bore
Surron Hyper Bee Motor Gearbox Front Sprocket
15.00 EUR
E-Ride Pro foot peg mount, a black forked bracket with two pivot holes and a threaded stud, shown with its blue lock nut
E RIDE PRO Pro Foot Peg Mount Assembly, S/SS2.0/SS 3.0/SR
65.00 EUR
220mm E-Ride Pro front brake disc lying flat, a steel wave-edge rotor with curved cut-outs and a six-bolt centre carrier
E RIDE PRO 220mm Front Brake Disc
26.00 EUR
Pair of black wide E-Ride Pro foot pegs with studded platforms, shown with two coil return springs and two pivot pins
E RIDE PRO wide foot pegs (left and right)
65.00 EUR
Waygom tube 4.25/4.50-19" 009023 009023
Waygom tube 4.25/4.50-19" 009023
12.00 EUR
Surron Ultra Bee 12V converter with a finned black cast body and two short leads ending in grey and black plugs
Surron Ultra Bee Voltage Converter 12V
90.00 EUR
Surron Ultra Bee main wiring harness laid flat, the braided loom fanning out into keyed connectors at both ends
Surron Ultra Bee Main Wiring Harness
180.00 EUR